Heat Exchanger Experts For Over 85 Years.
News & Exhibitions in the Americas
Date: March 25, 2020 Message from Group President & CEO With the escalating severity of the coronavirus (COVID-19) outbreak globally, I wanted to assure you that Tranter is firmly committed to continuously supporting our customers, while ensuring the safety of our employees. All of our factories and service centers in North America, South America, Europe…
Edmonton, Canada March 25, 2020 Our field service crew in Canada visited a gas gathering and processing business that had issues with their plate heat exchanger. Our on-site team removed the plate pack, cleaned and oiled the guide bar, inspected the plates and gaskets, removed two damaged plates, put the unit back together and pressure…
Wichita Falls, TX March 20, 2020 A Superchanger® Plate Heat Exchanger is headed to Georgia to be used in a General Manufacturing application to cool water. Our plate heat exchangers are built into core processes, improving uptime, saving energy and reducing maintenance burdens. To learn how Tranter PHE’s can help in efficiency in you general…
Wichita Falls, TX March 11, 2020 This Platecoil® Bank is in the final stages of welding and is one of 40 banks that will be used in a Marine Cargo Holding application. The barge they will be installed on is in the Gulf of Mexico and will use the Platecoil banks to maintain the oil…
Wichita Falls, TX March 5, 2020 A Superchanger® Plate Heat Exchanger is headed to the Gulf Coast to be used in a Petrochemical application to cool hot crude with seawater. Hot wellhead crude must be cooled to reduce the vapor pressure of methane and other volatile gases for safety. Superchanger units with titanium plates using…
Wichita Falls, TX February 25, 2020 A Superchanger® with a special paint job and a nice aluminum shroud is heading to the gulf to be used in a Marine Hydraulic Oil application. Due to the environment where the unit will be used, an Amercoat multipurpose polyamide cured epoxy coating was needed. This unit was also…
Wichita Falls, TX February 18, 2020 An ASME stamped curved Platecoil® piece is heading to Alabama for a long time chemical customer. The Platecoil panel is curved to meet their specific requirements and will be applied using a Mastic compound. A multitude of design configurations and over 300 different sizes make Platecoil units ideally suited…
Wichita Falls, TX February 13, 2020 A very large Superchanger® is headed to a natural gas-fueled power plant. Tranter plate heat exchangers are improving thermal management and economy in both fossil-fired and nuclear stations. Compact size, trusted-quality products and ease of maintenance make them an attractive choice for new construction, retrofits or capacity expansions. To…
AHR Expo February 3-5, 2020 Orange County Convention Center – Orlando, FL Booth 3728 www.ahrexpo.com